Ordo Xenos Inquisitor Conversion
After some time out (due to real life) I have finally got stuck back into my Inquisitor conversion. So much has happened since I first started this, mainly the release of Codex Inquisition and my own changes in taste. I have had a vision for two types of Inquisitor for some time now. An Ordo Malleus Inquisitor with a Storm Trooper type retinue, and this Ordo Xenos Inquisitor with a specific team of throne agents. Both Inquisitors having various supporting transports mainly a Valkyrie though.
With the release of the new Codex Inquisition, I can actually field these units legally in a game which is a total bonus as I never thought I would be able to. I almost feel like GW stole my thoughts lol. And if your reading GW, we could really do with a 28mm Inquisitor Skirmish game!
Anyway, the Xenos Inquisitor is coming along nicely and I will be delving into him and his retinue with renewed gusto, Below is the progress so far. Keep an eye out for one of his Throne Agents as well. Elexia Saphyre will be infiltrating soon.
So the main advancments this time are as follows. The Power / Force sword now has some power line on both side to give it that powered effect. The right arm now has a sleeve turned up on it to match the left and I have put the head in place and green stuffed the neck. I was not sure about adding the head at this stage but figured I would be able to paint it just as well stuck on rather than off, plus I needed to get the neck done.
The power lines on the sword blade are the same length on both sides and once painted should look OK.
I wanted to arm him with a needle pistol, just something a little different and I had an image of what I wanted to do. But I was led to reconsider after realising that if he ever came up against light armour he would be in trouble. So I changed my mind and gave him a Plasma Pistol instead. I managed to get hold of some small Forge World Plasma Pistols so the scale was right for him.
Cyber Mastiff
No change to the Mastiff however I have completed the base. When painted I intend to add some watery sludge into the grills, almost like it is a drain or something.
I do love this model!
Elexia Saphyre
So here is the start of a very daunting figure. This will eventually be Elexia Saphyre, an imperial throne agent. The base model is a Dark Elf Sorceress and I have already hacked it apart. This will look totally different by the time I have finished, but I needed the base to build upon.
Not shown here but her legs have been heated and bent in making her look a bit funny at the moment, but after the build up of green stuff will look like she is standing with her legs together with one slightly behind the other. More on Saphyre soon. Oh you can also see an image of what I want her to look like on the side bar to the right.
And here is her proposed base. Plain and simple but matching the others on the team. I am hoping that the model will be enough to not warrant a more detailed base.
As I said though, this is well out of my comfort zone and will be a very testing modelling experience!
The power lines on the sword blade are the same length on both sides and once painted should look OK.
I wanted to arm him with a needle pistol, just something a little different and I had an image of what I wanted to do. But I was led to reconsider after realising that if he ever came up against light armour he would be in trouble. So I changed my mind and gave him a Plasma Pistol instead. I managed to get hold of some small Forge World Plasma Pistols so the scale was right for him.
Not sure if I want to add some shoulder guards on him yet, what are your thoughts? Bearing in mind the jacket and arms will be that same colour. But then I could add onto the shoulder guards some =][= symbols, again thoughts?
The start of his sword scabbard that will be strapped to his back. This is being made out of two Grey Knight Falchions. Not looking much now, but when smoothed and the details added will hopefully look good. It is just the right length for the sword to fit in.Cyber Mastiff
No change to the Mastiff however I have completed the base. When painted I intend to add some watery sludge into the grills, almost like it is a drain or something.
I do love this model!
Elexia Saphyre
So here is the start of a very daunting figure. This will eventually be Elexia Saphyre, an imperial throne agent. The base model is a Dark Elf Sorceress and I have already hacked it apart. This will look totally different by the time I have finished, but I needed the base to build upon.
Not shown here but her legs have been heated and bent in making her look a bit funny at the moment, but after the build up of green stuff will look like she is standing with her legs together with one slightly behind the other. More on Saphyre soon. Oh you can also see an image of what I want her to look like on the side bar to the right.
And here is her proposed base. Plain and simple but matching the others on the team. I am hoping that the model will be enough to not warrant a more detailed base.
As I said though, this is well out of my comfort zone and will be a very testing modelling experience!
The Inquisitor will be finished soon apart from the painting as will the Cyber Mastiff. My Imperial Enforcer will have a few changes made and I will show him soon.
As a parting thought, I am still in need of a name for my Inquisitor. I just can't seem to find one that is fitting. Any suggestions feel free to comment. Any held on painting red leather would also be helpful!
You can find the other posts here: 'Part I', 'Part II', 'Part III', 'Part IV'.
You can find the other posts here: 'Part I', 'Part II', 'Part III', 'Part IV'.
~ Aliens are scum, they must be eradicated from our worlds,
purged from the galaxy, destroyed wherever they appear. However, on occasion
they can prove a useful tool ~
Very nice work
ReplyDeleteThanks for the compliment. It's coming along nicely.
DeleteDoes your wife know you went looking for pictures like that :-P
ReplyDeleteThe inqusitor is looking great can't wait to see it on the battlefield
She does know, but I did tell her she could never be replaced lol.
DeleteLooking forward to trying him out, got a way to go yet though. Working on Alexia Saphyre over the weekend so will have more coming soon.
Nice work. With regards to the shoulder pad things, you could do a plain shoulder pad and then paint on the design you want.
ReplyDeleteThank you, I think that's a good idea, it did not occur to me to paint =][= symbols on. I thinki will add the soulder guards, after all, he is supossed to be in his carapce armour.
DeleteThe Inquisitor's pose looks really dynamic. The details like scrolls and his sword give hints of xenos artifacts. A nice touch to the model's background.
ReplyDeleteThanks for the compliment. I will be posting up his newly added shoulder guards soon. I think all the other detailing will come from the painting, that's if I can pull it off.
Delete